20kV Cubicle Maintenance at PT PLN (Persero) APJ Banten Utara Rayon Prima Krakatau

Article Sidebar

PDF
Published: May 31, 2024
DOI: https://doi.org/10.52005/fidelity.v6i2.226
(Abstract view) : 44
(PDF download) : 29
Keywords:
20kV cubicle, Maintenance, PT. PLN (Persero) APJ North, Banten Rayon Prima Krakatau

Main Article Content

Alif Kautsar
Sultan Ageng Tirtayasa University
Mohammad Fatkhurrokhman
Sultan Ageng Tirtayasa University

Abstract

The disturbances that often occur in 20kV cubicles are those with low insulation resistance values ​​caused by several factors such as environmental conditions, humidity levels, dust, temperature, water, pressure disturbances and other disturbances. If this disturbance is left unchecked, it can cause short circuits and electric current leaks. Another disturbance that is often experienced by 20kV cubicles is corona, where this disturbance causes a hissing sound in the cubicle and the appearance of rust on the indoor contact parts of the cubicle. If this condition occurs continuously it can cause serious damage to all 20kV cubicle components and cause losses for customers and PT. PLN (Persero). So to anticipate these problems, maintenance is required on 20kV cubicles. PT. PLN (Persero) carries out annual maintenance of 20kV cubicles to increase the insulation resistance value and overcome the problems of hissing and rust caused by corona events. This Industrial Practice assignment discusses the maintenance of 20kV cubicles in accordance with PT's SOP. PLN (Persero). After carrying out maintenance on the 20kV cubicle, the problems that occur can be resolved, such as increasing the insulation resistance value and the disappearance of the hissing sound and rust on the contacts of the 20kV cubicle.

Article Details

How to Cite
[1]
A. Kautsar and M. Fatkhurrokhman, “20kV Cubicle Maintenance at PT PLN (Persero) APJ Banten Utara Rayon Prima Krakatau”, Fidelity, vol. 6, no. 2, pp. 41-48, May 2024.
Issue
Vol 6 No 2 (2024): Edition for May 2024
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Lisensi Creative Commons
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with FIDELITY : Jurnal Teknik Elektro agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Lisensi Creative Commons
Jurnal FIDELITY : Jurnal Teknik Elektro is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Received 2024-04-30
Accepted 2024-05-11
Published 2024-05-31

References

Andi Mahardi Hendrawan, 2020. Maintenance of Liaison Equipment.

Bonggas L, Tobing. 2018. High Voltage Equipment. Publisher PT Gramedia Pustaka Utama.

Don Bosco. 2017. Analysis and Simulation of the Initial Stress of Corona Formation in a Cubicle Model (Final Project, University of Indonesia, Padang, Indonesia).

Hardika, Iwan, "Analysis of the Effect of Distance Between Wires and Cross Arm Length of 500 KV Extra High Voltage Air Lines on Electric Field Strength", Research Department of Electrical Engineering, Diponegoro University, Semarang, 2019.

Nurdianita Fonna ISBN: 978-623-229-270-3 Publisher: Guepedia Publisher

Prayoga Setiajie, 2020. Maintenance of 20kv Outgoing Cubicle PMT at Sayung GI.

PT PLN (Persero). (2020). Electric Power System Network Rules. Jakarta: Pusdiklat.

PT. PLN (Persero). (2018). 20kV Cubicle Maintenance. Jakarta: Pusdiklat.

PT. PLN (Persero). (2018). Maintenance of 20kV Cubicle Components. Jakarta: Pusdiklat.

PT. PLN (Persero). (2018). Introduction to 20 KV Cubicles. PLN Education and Training Center.

PT. PLN (Persero). (2018). Construction standards for distribution substations and TM 20 KV cubicles.

Santha, Kumar. Free Space and Minimum Clearance on High Voltage Air Lines (SUTT) and Extra High Voltage Air Lines (SUTET)”, BSN, Jakarta, 2020

Saraswati, Amalia. 2018. "Calculation of Corona, Audible Noise and Radio Interference on 500 Kv Extra High Voltage Air Lines with Varying Distances Between Wires and Distances Between Circuits." Department of Electrical Engineering, Faculty of Engineering, Diponegoro University Jalan Prof. Sudharto, Tembalang, Semarang, Indonesia

Sarimun, Wahyudi. 2019. Engineering Services Handbook, second edition. Garamond Publishers.

SPLN 46-1-1981: Guidelines for Limiting Noise Levels, Part I: Noise Levels in the Work Environment”. Jakarta: Pusdiklat.

Susilo, Untung, "Analysis of the Effect of Beam Conductor Configuration on Efficiency, Voltage Regulation and Corona in Air Transmission Lines", Research Department of Electrical Engineering, Diponegoro University, Semarang, 2019.

Syahbana, Rusdi. Analysis of Corona Formation in 20kv Cubicle Channels and Their Effect on Power Losses. Vol. 2 No. 48, September 2019. ISSN: 0854-7904