Analysis of Damage to Network Time Protocol (NTP) Server on Cengkareng Radar Equipment in Perum LPPNPI Branch JATSC

Article Sidebar

PDF
Published: May 31, 2024
DOI: https://doi.org/10.52005/fidelity.v6i2.212
(Abstract view) : 53
(PDF download) : 34
Keywords:
On The Job Training, Network Time Protocol, Perum LPPNPI

Main Article Content

Raihan Abrar
Politeknik Penerbangan Indonesia Curug
Feti Fatonah
Politeknik Penerbangan Indonesia Curug
Adenia Kusuma
Politeknik Penerbangan Indonesia Curug

Abstract

The On The Job Training (OJT) program which will be implemented in 2022-2023 also includes collaboration with the LPPNPI Jakarta Air Traffic Service Center (JATSC) Branch Office. On The Job Training (OJT) involves various divisions that handle various equipment and facilities that support aviation safety, including equipment such as the Network Time Protocol (NTP) Server used to synchronize the time of equipment connected to the server network at the Jakarta Air Traffic Services Center (JATSC), thereby ensuring accurate operating times for all connected equipment. All of these efforts aim to improve safety and efficiency in aviation at the national and international levels. However, in this case, in operation, not all equipment always runs well, as does Network Time Protocol (NTP) server 1 at the LPPNPI Jakarta Air Traffic Services Center (JATSC) Branch. The purpose of this research is that the author wants to solve the problems that occur in On The Job Training (OJT) activities at Perum LPPNPI Jakarta Air Traffic Services Center (JATSC) Branch.

Article Details

How to Cite
[1]
R. Abrar, F. Fatonah, and A. Kusuma, “Analysis of Damage to Network Time Protocol (NTP) Server on Cengkareng Radar Equipment in Perum LPPNPI Branch JATSC”, Fidelity, vol. 6, no. 2, pp. 6-14, May 2024.
Issue
Vol 6 No 2 (2024): Edition for May 2024
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Lisensi Creative Commons
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with FIDELITY : Jurnal Teknik Elektro agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Lisensi Creative Commons
Jurnal FIDELITY : Jurnal Teknik Elektro is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Received 2024-04-03
Accepted 2024-04-30
Published 2024-05-31

References

Nasir Miftahul, “PEMANFAATAN PUBLIC NTP SERVER SEBAGAI ALTERNATIF PENGGANTI PERANGKAT SINKRONISASI WAKTU BERBASIS GPS PADA FASILITAS TELEKOMUNIKASI PENERBANGAN,” 2021.

Mills D. L., “Internet time synchronization: the network time protocol,” D. L. Mills, vol. 39, no. 10, pp. 1482–1493, Oct. 1991.

M. Muthi, S. Susilo, and H. Suliantoro, “ANALISIS KEBIJAKAN CORRECTIVE DAN PREVENTIVE MAINTENANCE PADA MESIN RAPIER, SHUTLE, WATER JET PADA PROSES WEAVING di PT. TIGA MANUNGGAL SYNTHETIC INDUSTRIES,” 2017.

Widasari Mutiara, “PERBAIKAN KERUSAKAN REMOTE CONTROL SYSTEM UNIT(RSCU) PADA PERALATAN DVOR (DOPPLER VHF OMNIDIRECTIONAL RANGE)STUDI KASUS BANDARA AHMAD YANI SEMARANG,” Penelitian Politeknik Penerbangan Surabaya , vol. 7, 2022.

M. M. L. C. Y. Siew, S. K. O. Chang, and A. Y. C. Nee, “Human-oriented maintenance and disassembly in sustainable manufacturing,” vol. 150, Dec. 2020.

D. Sartika, A. Asngadi, and S. Syamsuddin, “Analisis Pemeliharaan Mesin Cco (Crude Coconut Oil) Studi Kasus Pada Pt. Spo Agro Resources,” Jurnal Ilmu Manajemen Universitas Tadulako (JIMUT), vol. 6, no. 1, pp. 10–19, Aug. 2020.

I. Errandonea, S. Beltrán, and S. Arrizabalaga, “Digital Twin for maintenance: A literature review,” Comput Ind, vol. 123, p. 103316, Dec. 2020, doi: 10.1016/j.compind.2020.103316.

R. Meriah, K. Barkaoui, G. Liu, and O. B. Driss, “On modelling and evaluation of corrective and preventive maintenance policies of unreliable manufacturing systems,” in 2019 6th International Conference on Control, Decision and Information Technologies (CoDIT), IEEE, Apr. 2019, pp. 1752–1757. doi: 10.1109/CoDIT.2019.8820665.

I. N. Rachmawati, “PENGUMPULAN DATA DALAM PENELITIAN KUALITATIF: WAWANCARA,” 2007.

Dr. Antonius Alijoyo, Bobby Wijaya, and Intan Jacob, Structured or Semi-structured Interviews. Bandung: CRMS, 2021.

SELEX Sistemi Integrati Inc, “Operations and Maintenance Manual Model 1150A Doppler VHF Omni Range (DVOR),” New York, Nov. 2008.