Design of Protection Relay Prototype Against Arduino Uno Overload Interference in Electrical Installations

Main Article Content

Abdul Rauf
Belly Yan Dewantara
Istiyo Winarno

Abstract

Electrical installations are prone to disturbances, both short circuits and overloads, for this reason protection is needed in home electrical installations. MCB or mini circuit breaker is generally widely used as protection in electrical installations how the MCB works. When there is an overload disturbance, the MCB will cut off the electric current flowing in the electrical installation. In this study, researchers will create a prototype that will detect overload disturbances that occur in electrical installations. The advantage of developing this prototype is that the flow can be monitored. The prototype consists of Arduino ATmega 328, ACS712 sensor, relay, push button. The way this tool works is when there is a disturbance in the electrical installation the ACS712 sensor will detect a current which will then send the signal to the Arduino and the relay. The current value will be displayed on the LCD screen. This prototype contributes an overload protection equipped with current monitoring which can later be used by household applications.

Article Details

How to Cite
[1]
A. Rauf, B. Y. Dewantara, and I. Winarno, “Design of Protection Relay Prototype Against Arduino Uno Overload Interference in Electrical Installations”, Fidelity, vol. 5, no. 3, pp. 168-174, Sep. 2023.
Section
Articles
Received 2023-07-09
Published 2023-09-30

References

Dita, P. E. S., Fahrezi, A. Al, Prasetyawan, P., & Amarudin, A. (2021). Sistem Keamanan Pintu Menggunakan Sensor Sidik Jari Berbasis Mikrokontroller Arduino UNO R3. Jurnal Teknik Dan Sistem Komputer, 2(1), 121–135. https://doi.org/10.33365/jtikom.v2i1.111

Djuandi, F. (2011). Pengenalan Arduino√ Oleh : Feri Djuandi. Pengenalan Arduino, 1–24.

Guntur Istiqlal, M. (2018). Perhitungan Time Dial Setting (Tds) Rele Arus Lebih Pada Sistem Kelistrikan Pt. Petrokimia Gresik Pabrik Amurea 2 Menggunakan Metode Modified Particle Swarm Optimization (Mpso).

Isfarizky, Z., & Mufti, A. (2017). Rancang Bangun Sistem Kontrol Pemakaian Listrik Secara Multi Channel Berbasis Arduino (Studi Kasus Kantor Lbh Banda Aceh). Kitektro, 2(2), 30–35.

Kasrani, M. W., & Widyanto, G. (2016). Perancangan Prototype Pengendali Relay Berbasis Web dengan Ardino Uno dan Ethernet Shield. JTE Uniba, 1(1), 23.

Palaha, F. (2017). PENGUJIAN PROTYTIPE PROTEKSI INSTALASI RUMAH MENGGUNAKAN ACS 758 BERBASIS ARDUINO. 5, 67–74.

Putra, G. S. A., Nabila, A., & Pulungan, A. B. (2020). Power Supply Variabel Berbasis Arduino. JTEIN: Jurnal Teknik Elektro Indonesia, 1(2), 139–143. https://doi.org/10.24036/jtein.v1i2.53

Suyanto, D., & Yusuf, H. (2013). Perancangan Prototype Proteksi Arus Beban Lebih Pada Beban DC Menggunakan Mikrokontroller. Elektum : Jurnal Teknik Elektro, 14(2), 25–34.

Thowil Afif, M., & Ayu Putri Pratiwi, I. (2015). Analisis Perbandingan Baterai Lithium-Ion, Lithium-Polymer, Lead Acid dan Nickel-Metal Hydride pada Penggunaan Mobil Listrik - Review. Jurnal Rekayasa Mesin, 6(2), 95–99. https://doi.org/10.21776/ub.jrm.2015.006.02.1

T. Tiyono, "PERANCANGAN SETTING RELE PROTEKSI ARUS LEBIH PADA MOTOR LISTRIK INDUSTRI," Transmisi: Jurnal Ilmiah Teknik Elektro, vol. 15, no. 1, pp. 40-46, Jun. 2013. https://doi.org/10.12777/transmisi.15.1.40-46