Automatic Gas Control System In The Motorcycle Braking Process With The Concept Of Non-Uniform Slowing Down Motion
Article Sidebar
Main Article Content
Abstract
When motorcyclists have an accident, they are at high risk of suffering severe or fatal injuries. The difficulty experienced by motorcyclists and considered one of the most complicated to do in an emergency is braking because motorcycle accidents are often caused by loss of control or stability when braking as evasive action. In the braking process, a motorcycle must pay attention to distance and speed so that the deceleration during braking is by the kinematic concept to avoid the shock force during braking, in this study uses research and development methods in making automatic braking systems on motorbikes. The actuator system controls the brake pedal, and the gas pedal uses a stepper motor. The two stepper motors will move automatically if the motorbike detects an object in front of it at less than 4 meters. The angle of the stepper motor that drives the brake lever is in a span between 0 degrees to 30 degrees, while the tip of motion of the stepper motor that moves the gas pedal is in a span of 0 degrees to 70 degrees. The angle movement of the stepper motor is influenced by the distance detected by the HC-SR04 type proximity sensor and the motorbike speed detected by the KY-003 type speed sensor, which works by utilizing the hall effect principle. The results of the tests that have been carried out show that the automatic braking system created can work well with an indicator that there is no shock force during the automatic braking process
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with FIDELITY : Jurnal Teknik Elektro agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Jurnal FIDELITY : Jurnal Teknik Elektro is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Accepted 2020-07-29
Published 2020-09-30
References
Aidoo, Eric Nimako, and Richard Amoh-Gyimah. "Modelling the risk factors for injury severity in motorcycle users in Ghana." Journal of Public Health (2019): 1-11.
Merkel, Nora Leona, et al. "Tolerability of Unexpected Autonomous Emergency Braking Maneuvers on Motorcycles-a Methodology for Experimental Investigation." National Highway Traffic Safety Administration (Ed.), The 26th ESV Conference Proceedings. International Technical Conference on the Enhanced Safety of Vehicles (ESV), Eindhoven, The Netherlands. 2019.
Hobday, Michelle. "Motorcycle safety in Western Australia: review of popular routes, crash risk factors and options to improve current state, based on Safe System approach." (2019).
Gil, Gustavo, et al. "Are automatic systems the future of motorcycle safety? A novel methodology to prioritize potential safety solutions based on their projected effectiveness." Traffic injury prevention 18.8 (2017): 877-885.
Huertas-Leyva, Pedro, et al. "Loss of Control Prediction for Motorcycles during Emergency Braking Maneuvers Using a Supervised Learning Algorithm." Applied Sciences 10.5 (2020): 1754.
Louw, Tyron, et al. "Coming back into the loop: Drivers perceptual-motor performance in critical events after automated driving." Accident Analysis & Prevention 108 (2017): 9-18.
A. Suryana and H. Familiana, "Automatic Braking system on MotorbiCkes Using the concept of Kinematics Non-Uniform Slowing Down Motion For Safety of Motorcycle Riders on the Highway", 2019 iternational conference on ICT for smart society (ICISS), pp. 1-6, 2019.
Sitthiracha, S., and S. Koetniyom. "Safe Following Distances for Motorcycle to Prevent Rear-end Collision." Journal of the Society of Automotive Engineers Malaysia 4.2 (2020).
Markkula, Gustav, et al. "A farewell to brake reaction times? Kinematics-dependent brake response in naturalistic rear-end emergencies." Accident Analysis & Prevention 95 (2016): 209-226.
Ancillao, Andrea, et al. "Indirect measurement of ground reaction forces and moments by means of wearable inertial sensors: A systematic review." Sensors 18.8 (2018): 2564.
Hussein, E. M. A. (2007). COLLISION KINEMATICS. Radiation Mechanics, 67-151. [12] Singer, Harvey S., et al. Movement disorders in childhood. Academic press, 2015.
Hsu, Chao-Che, et al. "Using a hybrid method for evaluating and improving the service quality of public bike-sharing systems." Journal of cleaner production 202 (2018): 1131-1144.
Spaulding, Sandi J. "Basic biomechanics." Ergonomics for Therapists. Mosby, 2008. 94-102. [14] Pahmi, Arif, et al. "Parametric study on braking dynamics of motorcycle." Proceedings of Mechanical Engineering Research Day 2018 (2018): 6.
Benkirane, Said, and Ahmed Jadir. "Adapted Speed Mechanism for Collision Avoidance in Vehicular Ad hoc Networks Environment." INTERNATIONAL JOURNAL OF ADVANCED COMPUTER SCIENCE AND APPLICATIONS 9.10 (2018): 315-319.
Dr Michael Evans "Maths delivers! Braking distance" Australian Mathematical Sciences Institute (AMSI), 2013.
M. R. Hidayat, S. Sambasri, F. Fitriansyah, A. Charisma and H. R. Iskandar, "Soft Water Tank Level Monitoring System Using Ultrasonic HC-SR04 Sensor Based On ATMega 328 Microcontroller," 2019 IEEE 5th International Conference on Wireless and Telematics (ICWT), Yogyakarta, Indonesia, 2019, pp. 1-4.
Gandha, Gutama Indra, and Dewi Agustini Santoso. "The Newton's Polynomial Based-Automatic Model Generation (AMG) for Sensor Calibration to Improve the Performance of the Low-Cost Ultrasonic Range Finder (HC-SR04)." JURNAL INFOTEL 12.3 (2020).
Bereziuk, V., et al. "Means for measuring relative humidity of municipal solid wastes based on the microcontroller Arduino UNO R3." Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2018. Vol. 10808. International Society for Optics and Photonics, 2018.
Gon alves, Carlos, et al. "Wearable e-textile technologies: A review on sensors, actuators and control elements." Inventions 3.1 (2018): 14.